Why is it called a reciprocating saw?

A reciprocating saw isn’t used as a fine crafting tool. It’s a workhorse that gets its name from the short, back-and-forth cutting stroke of the blade. The blade is exposed so you can direct it into tight spaces.

A reciprocating saw is a type of machine-powered saw in which the cutting action is achieved through a push-and-pull (“reciprocating“) motion of the blade. The term is commonly applied to a type of saw used in construction and demolition work.

Similarly, what is the difference between a Sawzall and a reciprocating saw? Literally, a Sawzall is a reciprocating saw; its blade, after all oscillates up and down (or in and out ??). However, I generally use “reciprocating saw” to refer to smaller tools that are often called saber saws, or sometimes, jigsaws. Sawzalls are fairly large and heavy, and have a “throw” of perhaps 1 1/2”.

Similarly one may ask, what is the purpose of a reciprocating saw?

Reciprocating saws cut through just about everything short of a rock. It’s the go-to tool for remodeling and demolition. With a recip saw (also called a Sawzall, the brand name of Milwaukee’s tool), you can cut through lumber even if it’s embedded with nails.

Who invented reciprocating saw?

Sawzall® is an electric reciprocating saw made by Milwaukee Tools. It is capitalized and should always have the registered trademark symbol after it. Truly a revolutionary tool, the Sawzall® was invented in 1951 and was the “first portable electric hacksaw,” as the Milwaukee company site puts it.

Are reciprocating saws dangerous?

Reciprocating saws can cut through wood, metal, and all sorts of construction materials. But they can also be dangerous and need to be handled with the utmost care. One of the main hazards of recip saws is their potential for kickback.

Can I use a reciprocating saw to cut tree limbs?

Joe Truini: A reciprocating saw is one of the most versatile power tools you can own. It can cut virtually any building material. But it’s also great for trimming tree branches. Now you can use a standard reciprocating saw blade to cut tree branches, but you’ll get much better results if you use a pruning blade.

How thick can a reciprocating saw cut?

There are three facets to a reciprocating saw blade: Length, width, and thickness. The longer the blade, the deeper the cut. Wider blades will reduce bending and wobbling. Heavy-duty blades are typically 7/8-inches wide and 0.062-inches thick.

Can a reciprocating saw cut concrete?

The two general types of reciprocating saw blades are toothed blades and abrasive blades. Whereas toothed blades cut through soft materials, such as wood and plastic, abrasive blades grind through tough materials, such as concrete and stone.

How do you pronounce reciprocating saw?

Here are 4 tips that should help you perfect your pronunciation of ‘reciprocating saw’: Break ‘reciprocating saw’ down into sounds: say it out loud and exaggerate the sounds until you can consistently produce them. Record yourself saying ‘reciprocating saw’ in full sentences, then watch yourself and listen.

How do I choose a reciprocating saw blade?

Let’s take a look at what’s important when choosing a reciprocating saw blade. Material Type. No single reciprocating saw blade can cut every type of material. Teeth per inch (TPI) Blade Material. Tooth Material. Tooth Patterns. Blade Length. Blade Thickness. The best Goto-Blade.

Do all reciprocating saw blades fit?

Yes, reciprocating saw blades have a universal shank that is standardized to fit all reciprocating saws.

Can you cut plywood with a reciprocating saw?

Yes, you can cut wood with a reciprocating saw, along with a wide variety of materials. You can cut through plywood and plyboard with no problem using just a general purpose blade with your tool. You can also cut dimensional lumber and studs, too, along with the nails and screws.

What is a Hackzall?

The hackzall is a one hand tool which allows one hand free to hold the piece you are cutting.

Can you cut a circle with a reciprocating saw?

First, make a pass with a circular saw at its deepest blade setting and then finish the cut with the recip saw. The circular saw quickly does the bulk of the cutting. Its saw cut acts as a guide and starts the recip blade running level. Ease up pressure as you get close to the plywood; your blade tip could kick back.

What is the best reciprocating saw?

So here is my list of The 10 Best Reciprocating Saws. Ryobi P514 Cordless One+ Reciprocating Saw. PORTER CABLE PCC670B Cordless Reciprocating Saw. SKIL 9206-02 Reciprocating Saw. DEWALT DCS367B Cordless Compact Reciprocating Saw. BLACK+DECKER BDCR20B Cordless Reciprocating Saw. Makita JR3050T Reciprocating Saw.

Are reciprocating saws any good?

The reciprocating saw makes one of the best saws for pruning tree limbs or cutting small trees. You can actually use a standard reciprocating saw blade to cut tree branches, but a reciprocating saw will only work as good as the blade that is intended for a specific project – like a pruning blade.

What saw to use?

If you have work that requires accurate cuts, you’ll want to use one of these types of power saws. Chain saw. Property owners with a lot of trees probably have a chainsaw in the shed. Circular saw. A circular saw is the power tool version of the handsaw. Miter saw. Table saw. Jigsaw. Reciprocating saw. Band saw.

How do you cut straight with a reciprocating saw?

With the reciprocating saw held in front of you in line with your stomach, press the shoe against the material, aligning the blade to the marked line as closely as possible. Angling the saw slightly downwards, it will begin to rip through the material with the pressure you’ve applied.