Is my salt chlorinator working?

On the chlorinator box there should be a light or dial that indicates it is working. Take your test kit and place your thumb over the test tube. Then place it right into the eyeball and take the water. Test the water that water has just left the chlorinator – it should have a very high chlorine reading.

about five years

Similarly, why is my salt cell not working? Signs That Your Salt Chlorinator Cell Is Not Working When the flow monitor indicates “NO FLOW” in spite of water moving through the cell. Corroded plates and other anomalies upon inspection. Failure of polarity LEDs to alternate while in use. This is a sign of a problem with the PCB in the control box.

Similarly, you may ask, why is my salt chlorinator not producing chlorine?

A salt chlorinator cannot produce enough chlorine to do this task. Seek assistance from your local pool shop for the required procedure for your pool. Algae is the most common cause of low or zero chlorine levels. This issue must be treated manually before a salt chlorinator can operate correctly.

How often do you have to clean the cell of a salt chlorinator?

The number one maintenance item for a salt water chlorinator is to clean the salt cell regularly, every 2-6 months, but only as needed. Mineral deposits bridge the space between the metal plates, and not just in hard water areas.

When should you replace a salt cell?

Most salt chlorine generators have a salt cell that lasts typically from 3 to 5 years, you should check with the manufacturer to double check the life expectancy. Most salt chlorine systems come with a control panel or a self regulating system that will tell you when the cell needs to be cleaned or replaced.

Can a salt cell be repaired?

Salt Chlorine Generators do require some maintenance and repair. The salt cell will eventually lose performance and the controller circuit boards can develop problems over time. New technology in salt systems may also sway your decision to repair or replace your salt chlorinator.

How do you know if a salt cell is bad?

If the salt cell does not bubble, then you either have no power to the cell or you have a bad cell. Further troubleshooting will be required. If the salt cell bubbles, but only a little bit, then you probably have a bad cell.

How much does it cost to replace a salt cell?

Replacing the salt cell costs $700–$1100. Replacing the control board costs $500–$900. You can extend the lifespans by maintaining a consistent salt level, cleaning the cell only when needed, and using the reverse polarity function.

How long do you soak a salt cell?

15-20 minutes

What should my salt chlorinator be set at?

5 Maintenance Tips for Salt Chlorine Generators Try to maintain a consistent salt level of between 2,700 parts per million (ppm) and 3,400 ppm, with 3,200 ppm being ideal. Clean the chlorinator cell at least once a season or as needed.

Is it OK to put chlorine tablets in a saltwater pool?

Normally we suggest your pool to be at 3 ppm of chlorine, so if the salt system can only get you to 2 ppm of chlorine then possibly a tablet would help with that last little bit of chlorine needed. That’s great news, you should get much longer life on your salt cell being set at 10 vs. 70.

How do I raise the free chlorine in my saltwater pool?

Clean your salt cell (give it an hydrochloric acid bath in 10% acid 90% water for 3-5 minutes until majority of the calcium bubbles up and dissolves). Replace your Chlorinator Salt Cell. Replace your Chlorinator. Use granulated chlorine instead of liquid chlorine and add 1-2 cups – it’s much stronger.

Why is my chlorinator not working?

The Control Valve Is Clogged This reduces flow through the device and may cause the chlorine level in the pool to fall. To clear the valve, remove the lid; take out the chlorine tablets using tongs, and then use the tongs to remove sludge from the bottom of the chlorinator. Remove the screen, and hose it down.