How tall is a shelf?

The shelf height above a desk should be 22″ to 24″. A cabinet or shelf above a toilet should be about 2 feet above the tank. Shelves above a kitchen counter should be about 18″ to 23″, with about 15″ in between shelves.

Shelf Design Guidelines If the shelves will be accessed from a sitting position, the highest shelf should be no more than 60 inches above the floor. The lowest shelf should be 3 to 4 inches from the floor level. Shelf width or span is determined both by aesthetics and sag considerations.

Furthermore, how long can shelves be without support? Bookshelf width is typically no more than 12 inches. If the space is limited, the shelf can be reduced to 9 inches. Single bookcase units with two sides, top and bottom should be no wider than 36 inches without a center support.

Just so, how deep should a shelf be?

16 to 20 inches

How far above the toilet should a shelf be?

They should be at least 1″ less than the depth of the toilet tank lid usually 6″ but measure the depth of you toilet tank. The bottom shelf should be high enough so you can remove the tank lid for any reason – 10″ to 12″.

What is the average space between shelves?

between 8 and 12 inches

How do you calculate the space between shelves?

Measure the thickness of each shelf and calculate the total of these. Subtract this from the height and you now have the total distance of the space between all the shelves. Divide this by the number of spaces and that is your measurement. So each space will be 1786 divided by 7 = 255.14 mm round this off to 255 mm.

How wide should floating shelves be?

For example, if you are floating a bookshelf, typically your shelf won’t need to be deeper than 10″ since most books are less than 9″ deep. If you are floating kitchen shelves, 12″ usually works since most cabinets and the plates, cups, and bowls they house, are 12″ or less deep.

How wide should garage shelves be?

Shelves should be deep enough to safely store items, yet not so deep that items will get hidden behind each other. For a garage, 16” depth is ideal for the storage of large items and 12” depth is ideal for smaller items. Adjustability is very important to maximize the use of space.

How tall is a standard bookcase?

The standard height of a four-shelf bookcase is 54 inches. Standard narrow four-shelf bookcases will have a width of 24 inches, and a wide four-shelf bookcase will have a width of 45 inches. The depth may range from 12 inches to 14 5/8 inches.

How do you measure a shelf?

How to Measure Shelves Look at the space where you want to place the shelving. Stretch your tape measure across the area where you want to install the shelf. Step back in order to view the tape. Use the tape measure to determine how much space you want in between the shelves.

What is standard height for closet shelving?

Generally, a closet shelf is about 87 inches above the floor, and a single closet rod is mounted at around 72 inches in height.

How deep is a book?

6 Answers. 12″ deep shelves are to deep for most books, again most books. I would make the bookshelf a “breakfront”, the 2 lower shelves 12″ deep above a 4″ base or toespace, and step the front back at the 30-32″ height and make the remaining shelves, 8, maybe 10″ deep. “Most books” is far too broad.

How wide are closet shelves?

Tip: Shelf widths at 12-inch increments are best because folded clothes average 12 inches across and 14 inches deep.

What is the best wood to use for shelving?

The Best Wood to Use for Wood Shelves Pine. Pine is one of the most affordable and popular softwoods in the market. Plywood. Plywood is another good option for people who are interested in making their own shelves. Cherry. Although cherry is a hardwood, it is lightweight and easy to use. Koa. Red Oak. Paduak. Mahogany.

How far from the wall should a closet rod be?

A common convention is 12″ from the back wall to the center of the rod. People typically put the closet rods in the middle of the closet. Minimum closet depth is 24″ so that puts the closet rod at 12″ too. Certain types of clothing tend to extend past the edge of the hanger.

How much does it cost to add built in bookshelves?

You will pay anywhere between $200 to $500 to install built-in shelving units yourself. The cost of the shelving itself will be anywhere from $25 to $150, depending on the size you need.

How deep is a standard pantry?

Standard pantry depths range from 12 to 27 inches.