How many feet are in a roll of ice and water?

x 75 ft. (225 sq. ft.) Ice and Water Shield Roll Roofing Underlayment in Black.

As for length, you’ll have to measure the roof in question. The length and coverage of a roll of ice and water protector will vary by manufacturer. GoldShield™ is 66.7 feet long (19.9 meters), and one package has an area of 200 square feet (19.58 meters).

Likewise, how thick is ice and water shield? Specs

Manufacturer Grace
Installation Temperature 40 degrees Fahrenheit or higher
Length – Feet 66.6
Package Quantity 1
Thickness – Inches 40 mil

Regarding this, how much does a roll of ice and water weigh?

Product Data

Roll length 75 ft (22.9 m) 66.6 ft (20.2 m)
Roll width 36 in (914 mm) 36 in (914 mm)
Roll size 225 ft2 (20.9 m2) 200 ft2 (18.6 m2)
Packaging Corrugated cartons Corrugated cartons
Roll weight 61.4 lbs (27.9 kg) 55 lbs (24.9 kg)

How long is a 2 square roll of ice and water shield?

WeatherWatch Videos

Size
2.0 Square Roll
Widths 36″ (.914 m)
Roll Lengths 66.7 ft. (20.33 m)
Square Feet Per Rolls 2 squares/roll – 200 sq. ft. (18.58 m²) excludes laps

Does felt go under ice and water shield?

Re: Felt Paper And Ice/water Shield I always install the felt above the ice and water barrier. It is a common look out for the next time the roof needs to be worked on.

Do you nail ice and water shield?

When nails penetrate the ice and water shield on the roof, the rubberized nature of the material creates a gasket effect on the shaft of the nail. Leaks simply don’t happen. Not only does ice and water shield stop leaks caused by ice dams, but it also stops leaks created by fierce wind-driven rain.

How much is a roll of ice and water shield?

Grace Ice and Water Shield HT 36 in. x 75 ft. Roll Roofing Underlayment (225 sq. ft.) Compare all Specifications. $186.18 /roll $79.98 /roll $205.00 /roll (170) (188) (51)

What is the best ice and water shield?

“Grace Ice & Water Shield® has the best adhesion to the roof deck,” said one Wisconsin contractor who uses the roofing underlayment on job sites. “You will not have problems with ice damming, leaks, wind-driven rain… anything like that.”

Does Ice and Water Shield go under drip edge?

The best way is to install the roof drip edge only along the eaves first, then place ice-and-water barrier (in the snowbelt) or felt paper (underlayment) over the drip edge. This lets any water that gets on the roof run down the underlayment and over the drip edge.

What is ice guard?

Definition. A roofing ice guard is a thick, rubber membrane that is applied directly to the wooden deck of a roof prior to installing shingles but after installing the roof drip guard. It comes with a strong self-adhesive backing that is used for installation.

What is ice shield?

Ice and water shield is a self-adhering waterproofing underlayment that is used in roofing to help prevent damage caused by ice dams and wind driven rain.

Do you need ice and water shield under metal roofing?

The product should be a premium, high temperature ice and water shield for use with tile, metal, and other roofs with scrim reinforced top surface. It self-seals around nails and provides protection for roof areas prone to ice and water intrusion. The rakes on gable roofs also need treatment to the same standard.

Can you put ice and water shield on a wet roof?

We staple most our ice and water shield even on 4/12’s. If you walk on unfastened ice and water when the sun is on it when hot it will smear. More than likely even if put over a damp deck it will dry out and adhear just fine.

Can you put ice and water shield over existing shingles?

Answer – Not in the handyman’s opinion. An Ice & Water Shield is a rubberized strip that must be applied over bare sheathing; not only will it stick better on the bare sheathing, but it will present a more neat appearance. So, shingles should be removed three feet up from the eaves.

How many squares are in a roll of ice and water shield?

Ice & Water Shield Roofing Underlayment 36″ x 36′ Roll – 108 Sq. Ft.

Is underlayment necessary for metal roof?

The simple answer is yes, your roof does need an underlayment. If your metal roof is going on top of asphalt shingles, then there is already an underlayment, and it likely doesn’t need another. Keep in mind, however, that expansion and contraction of the shingles could cause damage to the back of the metal over time.

Can ice and water shield be used on walls?

Installing a strip of self-healing bituthane membrane like Ice and Water Shield¨ under the siding at the bottom of the wall may be a worthwhile investment. Carefully detail the area at the bottom of the wall where the sill connects to the foundation.