How do you adjust the temperature on a Whirlpool refrigerator?

If you need to adjust the temperature, wait at least 24 hours between adjustments and then recheck the temperature. To make the Refrigerator colder, adjust the control to the next higher setting. To make the Refrigerator less cold, adjust the control to the next lower setting.

When adjusting temperature set points, use the following chart as a guide. The set point range for the refrigerator is 33°F to 45°F (0°C to 7°C).

Additionally, why the fridge is not cold but the freezer is? The most common cause for this condition is a problem with the defrost system. If the refrigerator freezer is cold but the refrigerator is warm, the evaporator fan motor might have failed. Every refrigerator has a set of coils called an evaporator. The evaporator may be frosted up caused by a defrost problem.

Secondly, what number should my fridge be on?

The settings on the fridge temperature dial show refrigerant power. Normally the numbers range from one to five. Number one is the least cool setting and number five the coldest. When your fridge is always full you need to select a number four setting.

Why is my fridge temperature too high?

If the main compartment in your refrigerator is too warm or too cold and adjusting the temperature controls doesn’t seem to help, first vacuum the compressor and condenser coils. If dirty coils aren’t the problem, check and reset the temperature in the food compartment.

Why is my Whirlpool refrigerator not cold?

Dirty condenser coils are the most common cause for a Whirlpool refrigerator not cooling. Condenser coils dissipate heat as the refrigerant passes through them. If the coils are clogged in dirt and debris, they can’t release the heat properly.

How do I know if my fridge is too cold?

Unplug the fridge. Find the cold control: it will be the knob with a range starting at “off,” inside your fridge, where the food’s stored. When the knob is at midpoint of its range, the fridge should be at about 38 degrees F. Check to ensure that the sensor wire or bulb is in its place and shows no sign of damage.

Is a fridge colder on 1 or 5?

So on a refrigerator what setting is coldest (1 to 5)? On every fridge the rules for the coldest settings are always the following: The numbers on the fridge’s temperature dial indicate refrigerant power. The higher the number goes the colder the fridge will maintain. Setting it to 5 will make your fridge the coldest.

How do I make my Whirlpool fridge colder?

To make the Refrigerator colder, adjust the control to the next higher setting. To make the Refrigerator less cold, adjust the control to the next lower setting.

Is 42 degrees OK for refrigerator?

When checked first thing in the morning the normal temperature range should be between 34-42 degrees Fahrenheit in the refrigerator section and between -5 and +8 degrees Fahrenheit in the freezer section for self-defrosting models, and 5 to 7 degrees for non self-defrosting models.

Why is the refrigerator too cold?

Other Possible Reasons Why Your Fridge Is Too Cold An air leak in a door seal can cause the control to keep calling for cold. The air is leaking into the compartment and raises the temperature. If the circulation fan is not working, this usually results in long run times and very cold temperatures in the freezer.

How do I reset my gi5fsaxvy02 whirlpool?

Press and hold the Door Alarm keypad. Press and hold the Freezer Temperature Down keypad within 3 seconds. Release the door alarm keypad and wait 3 seconds.

What is wrong with my Whirlpool refrigerator?

You may be experiencing Whirlpool refrigerator problems, like the freezer isn’t freezing or some other temperature control issue. The answer may be as simple as the door is ajar or the defrost timer is malfunctioning. But you may have a more complicated problem, like the refrigerator runs constantly or is noisy.