While extremely old cedar can be painted, it requires heavy preparation. Even then, the paint is not expected to last long. Surface preparation is the key to success when dealing with weathered wood. The siding must be free from mold, mildew, and dirt.
Do Not – Allow peeling paint to remain on the cedar siding before painting. Do – Prime the exposed wood, whether new or previously painted, with oil primer. These are tannins from cedar wood leaking through a water based primer. You have to use oil primers on cedar siding.
Also, what is the best finish for cedar wood? When a hard glossy surface is desired on a tabletop or window ledge, a seal coat of thinned varnish or lacquer sanding sealer makes cedar easier to smooth in preparation for one or two top coats of varnish or lacquer. Cedar accepts most finishes well, including penetrating oils, such as tung oil and linseed oil.
Subsequently, one may also ask, is it better to stain or paint cedar?
The stain is Durable: Another important reason why stain lasts longer than paint on cedar siding is that they are durable enough to take foot traffic. In fact, food traffic results in more abrasion than regular paint is meant to take. Due to its durable nature, stain protects wood better than the normal paint.
Does cedar take stain well?
Although cedar is a softwood like pine, it absorbs stain better than pine, especially when treated with a pre-stain wood conditioner. Indoor and outdoor cedar furniture are stained the same way. However, clear coat polyurethane, which gives the wood a shiny, smooth finish, should only be used on indoor furniture.
Will cedar bleed through paint?
Tannin Staining. Tan or brownish discoloration on the paint surface. Tannins exist in many woods, most notably cedar and redwood and can bleed through to the surface, leaving a yellowish-brown stain on the surface. These stains are more noticeable on lighter paint colors.
What is the best primer for cedar?
Cedar shake or siding, as well as redwood, is best primed with an exterior oil-based wood primer (some regions must use a latex primer due to VOC regulations).
How long does paint last on cedar siding?
five to seven years
How long does it take for Cedar to turn GREY?
It depends on your area and where your fence is in the ground. Sometimes its as early as 2 months, and other times it takes a year for the grey to set in. This is why stain is so necessary for your cedar wood. It keeps out the water, so those cells can keep doing their thing.
Should you paint cedar shingles?
Yes and no. In principal it is ok to go ahead with painting cedar without priming it first. However, any professional expert will strongly advise against it. The reason being, when you use a primer with a paint top coat, the finish lasts longer and is more resistant to damage.
How often should you paint cedar siding?
Cedar treatments should last 5-7 years High-quality paint or stain, properly applied, should last five to seven years, and as many as 10, depending on weather conditions and if you maintain the siding. However, you may need to reapply a clear-coat stain every two years.
How do you keep cedar looking natural?
Sweep or brush off the cedar area completely with your broom, removing any large debris and any dirt that can be brushed off easily. Mix the exterior wood wash, according to package directions, with water in the large bucket. Clean off the wood wash mixture using a power washer or garden hose. Dry the cedar.
What is a good stain for cedar?
The best wood stains for new cedar are deep penetrating paraffinic oil-based stains that are thinner in viscosity. Stains for new cedar wood should dive deep into the wood to condition the wood cells and provide protection from UV fading and moisture damage.
What lasts longer stain or paint?
Paint lasts longer. But in a head-to-head of painting vs. staining the deck, paint generally comes out as the more durable and colorfast finish, lasting 10 years or longer before requiring re-application. Stain finishes on decks are more short-lived, lasting from one to eight years before requiring re-application.
What is the best finish for red cedar?
semi-transparent stains These finishes are the best choice for Western Red Cedar, which is fully exposed to the weather, when a natural look is desired. Although these stains can be used on both smooth and textured Western Red Cedar, they will perform much better and last longer when applied to a textured surface.
Do you need to stain both sides of cedar siding?
If you want long lasting siding, it is a great idea to stain both sides. Start with the underside, and then finish with the top side. The stain helps to seal the siding and prevent moisture intrusion from the underside. You can do either or.
Should Cedar be stained?
Cedar should be stained as soon as it will accept the stain. This is easy to determine with penetrating semi-transparent stains. Apply the stain, if it soaks in its ready. If it pools on the surface, do it later.
How long will cedar siding last?
Cedar siding endures the elements well and if maintained properly can last many years. Some manufacturers offer warranties of 25 years or more. Cedar is classified as a durable species. The proper application of a finish coat will allow cedar siding to last for decades.